FOSROC CHEMICALS
Fosroc Chemicals (India) Pvt. Ltd. remains focused on the Industry, Infrastructure and Building Segment with a wide range of quality products. Admixtures and Surface Treatments Grouts and Anchors Industrial Flooring Concrete Repair Protective Coatings Joint Sealants and Adhesives Waterproofing Cement Additives
ADMIXTURES
Conplast SP 430
5,20,200 Liters
Also in 200 & 250 kg
Discription
High range super plasticising
admixture. Complies with
IS:9103:1999 and BS 5075 Part 3, it
also conforms to ASTM C-494 Type
F and Type G depending on the
dosage used
Dosage / Coverage/Yield
0.5 to 1.5 litre per 100 kg of
total cementitious material
Typical Use
Speeds up construction, increases workability and cohesion, aids pumping by reducing line friction and dry packing, low porosity resulting in sustainability improved water penetration resistance.
Conpalst SP 430 KRM6
5,20 and 200 Liters
bulk Supply
Discription
Conplast SP430KR(M)6 has been
specially formulated to give high
water reductions up to 25% without
loss of workability or to produce
high quality concrete of reduced
permeability.
Dosage / Coverage/Yield
0.5 – 1.5 litres /100 kg
of total cementitious material
Typical Use
• To produce pumpable concrete
• To produce high strength, high grade
concrete M30 & above by substantial
reduction in water resulting in low
permeability and high early strength.
• To produce high workability concrete
requiring little or no vibration during
placing.
Auramix 200
200 kg and Bulk Supply
Discription
High performance PCE based
admixture for wide range of
concrete grades.
Dosage / Coverage/Yield
0.3 to 2 percent by weight
of total cementitious
materia
Typical Use
Auramix 200 is a high performance
retarding super plasticisers intended for
applications where retardation and long
workability retention are required.
Auramix 300
200 & 250 kg and Bulk Supply
Discription
Advanced low viscosity retarding
super plasticiser, based on poly
carboxylic technology
Dosage / Coverage/Yield
0.5 to 3.0 litres/100 kg of total cementitious material
Typical Use
Auramix 300 is a high performance retarding
super plasticiser intended for applications where
retardation and long workability retention are
required, and it has been developed for use
in : Mass raft foundation, Pumped concrete,
Concrete requiring long workability retention,
High performance concrete.
Auramix 400
200 & 250 kg and bulk supply
Discription
Advanced low viscosity high
performance super plasticiser,
based on poly carboxylic
technology. Auramix 400 complies
with IS:9103-1999(2007). It also
complies with ASTM C494 Type G
Dosage / Coverage/Yield
0.4 to 2 percent by weight
of total cementitious material
Typical Use
Auramix 400 is a high performance super
plasticiser intended for applications where
high water reduction and long workability
retention are required, and it has been
developed for use in: Self-compacting
concrete, Pumped concrete, Concrete
requiring long workability retention.
Auracast 405
200 & 250 kg and Bulk Supply
Discription
High performance low viscosity
PCE based admixture for SCC
& early strength. Auracast 405
complies to IS:9103 : 1999 as a
water reducing admixture.
Dosage / Coverage/Yield
0.5 to 1.5 percent
by weight of total
cementitious material
Typical Use
Auracast 405 is a high performance super plasticizer suitable for precast concrete industry to obtain high early strength and workability retention. Suitable for Self compacting concrete.
Conplast WL Xtra
200 ml, 1 L, 5 L, 10
L, 20 L, 50 L and 200
litre container
Discription
Integral waterproofing admixture
with advanced technology.
Dosage / Coverage/Yield
The Optimum dosage is
200 ml for 50 kg of cement.
Site trials shall be carried
out to authenticate the
optimum dosage
Typical Use
Recommended for all types of concrete and
plaster. Ideal for basements, tanks, balcony,
floor and roof slabs
Conplast Crystalline
30 kg
Discription
Integral waterproofing admixture
based on crystalline formation to
produce water tight concrete.
Dosage / Coverage/Yield
1 to 2 % by weight
of total cementitious
material
Typical Use
Conplast Crystalline is an integral waterproofing
admixture to produce water tight concrete. The
active chemical in Conplast Crystalline react with
moisture available in concrete to produce non
soluble crystal formation throughout the pores of
capillary tracks thus making concrete permanently
sealed against water penetration from any
direction. Conplast Crystalline is developed to use
in all types of concrete foundation below ground,
water reservoir, tunnel concreting, retaining walls
and subways, water tank and swimming pools &
precast unit.
Cebex 112
100 ml, 1, 5, 20 and
200 litres
Discription
Mortar plasticiser and
plastering aid.
Dosage / Coverage/Yield
100ml/bag of total
cementitious materia
Typical Use
To improve workability and trowelling
properties of sand/cement mortar during
application and to minimise shrinkage
cracks
SURFACE TREATMENTS
Concure WB
5, 20 and 200 litre
(Available in white &
Clear)
Discription
Low viscosity wax emulsion, water
based concrete curing compound.
Complies to ASTM C 309-90
Dosage / Coverage/Yield
3-5 m2/litre
Typical Use
For spraying on freshly cast concrete, or newly
exposed concrete surfaces after removal of
form work, to form a temporary membrane
which will retain sufficient moisture for effective
curing to take place
Reebol
5, 20 and 200 litre
Discription
Stain free, concrete mould release
agent.
Dosage / Coverage/Yield
Reebol 20-60m2 litre*
depending on porosity &
texture of mould surface.
Typical Use
To provide quick,clean and easy stripping of
moulds and form work and ensure high quality
fair faced and stain free concrete.
Reebol Emulsion Xtra
5, 20 and 200 litre
Discription
Concentrated and emulsified
chemical mould release agent
Dosage / Coverage/Yield
1 litre of Reebol emulsion
Xtra when diluted with
6 litres of water will cover
80-180m2 depending upon
the nature of the substrate.
Typical Use
For easy stain free removal of concrete
moulds and form work of all types,
particularly where wooden form work is
used and de moulding and stripping times
exceed 24 hrs
Grouts & Anchors
Conbextra GP2
25 kg
Discription
Plastic shrinkage compensated,
high flow, high strength
cementitious grout. Complies to
ASTM C 1107 Type A.
Dosage / Coverage/Yield
13.3 Ltrs / 25 kg bag @
Flowable Consistency
Typical Use
Machine foundation grout with both Static
& dynamic loads, bridge bearings, precast
construction etc.
Conbextra GP2 N
30 kg
Discription
Plastic shrinkage compensated, high
flow, high strength cementitious
grout with low exothermic heat.
Complies to ASTM C 1107 Type A.
Dosage / Coverage/Yield
15.8 Ltrs / 30 Kg bag @
Flowable Consistency
Typical Use
Machine foundation grout with both Static
& dynamic loads, bridge bearings, precast
construction etc.
Conbextra EP10
1 Ltr
Discription
Low viscosity epoxy
injection grout.
Dosage / Coverage/Yield
Refer datasheet
Typical Use
Structural crack repair.
Conbextra EP75
14 Ltrs
Discription
High flow, high early & ultimate
strength epoxy grout suitable for
grouting thickness up to 75 mm.
Complies to ASTM C 1181.
Dosage / Coverage/Yield
Refer datasheet
Typical Use
Machine base grouting of heavy duty
compressors, rail plates in ballast less
track
Lokfix
0.5 & 2.5 Ltrs
Discription
Polyester resin grout.
Complies to BS 4551
BS 5080 & BS 2782.
Dosage / Coverage/Yield
Refer datasheet
Typical Use
For high strength corrosion resistant
anchoring of bolts and bars from 12-50 mm
diameter into concrete, rock, masonry or
brickwork where high speed of installation
and early application of load is required.
Lokfix E75
585ml
cartridges
Discription
High performance pure epoxy
3:1 resin cartridge system, for
anchoring reinforcement and
fixings into a variety of substrates
Dosage / Coverage/Yield
Refer Product
Technical data
shee
Typical Use
For high strength corrosion resistant
anchoring of bolts and bars from 12-50 mm
diameter into concrete, rock, masonry or
brickwork where high speed of installation
and early application of load is required.
Lokfix E55S
300ml
cartridges
Discription
Styrene free vinyl-ester resin
based cartridge system, for
anchoring reinforcement, fixings
into a variety of substrates
Dosage / Coverage/Yield
Refer Product
Technical data
sheet
Typical Use
Fixing of post installed reinforcement
Anchoring of threaded rod fixings
For horizontal, vertical and overhead application
Bonding and surface crack sealing applications
Cebex 100
225 g
Discription
Plasticised expanding
grout admixture. Complies
to BS: 8110 Part 1-1985,
Section 8.9.4.6.
Dosage / Coverage/Yield
Refer datasheet
Typical Use
Cebex 100 is an admixture for cementitious
grouts where a reduced water/cement ratio and
positive expansions are required. Applications
include bed grouting, duct grouting, non-shrink
infilling and jointing.
Conbextra Cable grout
225 kg bags
Discription
Pre-bagged, non-shrink
cementitious grout for
post tensioned cables
Dosage / Coverage/Yield
Yield 16.5 litres
/ 25 kg bag
(approx)
Typical Use
Post tensioned cable ducts and
Prestressed cable ducts
Concrete Repairs
Renderoc FC
20 kg
Discription
Single component polymer modified
cementitious pinhole filler.
Dosage / Coverage/Yield
4 m2@3 mm thickness
for 20 kg bag
Typical Use
For application to minor imperfections in concrete
and masonry surface up to 0-3 mm range.
Renderoc Plug
1 kg & 5 kg
Discription
Plasticised expanding
grout admixture. Complies
to BS: 8110 Part 1-1985,
Section 8.9.4.6.
Dosage / Coverage/Yield
–
Typical Use
For the rapid temporary patching and plugging
of concrete segments, concrete and brick tunnel
linings, sewage systems, below ground access
chambers
Renderoc HS Xtra
25 kg bags
Discription
Single component, fibre
reinforced, high strength,
shrinkage compensated, polymer
modified structural grade repair
mortar (M 80 grade).
Dosage / Coverage/Yield
13.4 litres per 25 kg bags
Typical Use
Renderoc HSXtra is suitable for hand and spray
application for repairs where high load bearing
is required. Typical applications would include,
but not be limited to Vertical and overhead
repairs to restore ‘covercrete’.General concrete
and masonry repairs. Voids greater than 10 mm
deep. Repairs to honeycombing. Larger scale
repairs where form work cannot be erected.
Renderoc RG
25 kg bags
Discription
Shrinkage compensated, free
flow, structural grade micro
concrete for concrete repairs
and strengthening (M 50 grade).
Dosage / Coverage/Yield
13 litres/25 Kg @ W/P 0.16
Typical Use
For repair to damaged reinforced concrete
elements particularly where access is restricted
and where vibration of the placed material
is difficult or impossible. Suitable for various
structural strengthening measures such as
encasements build-ups etc.
Renderoc RG SPL
25 kg
Discription
Shrinkage compensated, free
flow, high strength micro concrete
for repairs and strengthening of
concrete (M 75 grade).
Dosage / Coverage/Yield
Approximately 12.0 litres
per 25 kg bags
Typical Use
For repairs to damaged reinforced concrete
elements, particularly where access is restricted
and where vibration of the placed material is
difficult or impossible. It is suitable for various
structural strengthening measures such as
encasement build-ups, jacketing etc.
Renderoc FC
20 kg
Discription
Single component polymer modified
cementitious pinhole filler.
Dosage / Coverage/Yield
4 m2@3 mm thickness
for 20 kg bag
Typical Use
For application to minor imperfections in concrete
and masonry surface up to 0-3 mm range.
Renderoc Plug
1 kg & 5 kg
Discription
Plasticised expanding
grout admixture. Complies
to BS: 8110 Part 1-1985,
Section 8.9.4.6.
Dosage / Coverage/Yield
–
Typical Use
For the rapid temporary patching and plugging
of concrete segments, concrete and brick tunnel
linings, sewage systems, below ground access
chambers
Renderoc HS Xtra
25 kg bags
Discription
Single component, fibre
reinforced, high strength,
shrinkage compensated, polymer
modified structural grade repair
mortar (M 80 grade).
Dosage / Coverage/Yield
13.4 litres per 25 kg bags
Typical Use
Renderoc HSXtra is suitable for hand and spray
application for repairs where high load bearing
is required. Typical applications would include,
but not be limited to Vertical and overhead
repairs to restore ‘covercrete’.General concrete
and masonry repairs. Voids greater than 10 mm
deep. Repairs to honeycombing. Larger scale
repairs where form work cannot be erected.